Quartz Clear Mini-Tube Infrared Emitters

• Customization: Available
• Power: 40W
• Input Voltage: 220V
• Model NO.: quartz 04
• Transport Package: by Sea, by Air, by Train
• Specification: diameter 5mmto 350mm
• Origin: China
• Production Capacity: 200PCS Per Day

Product Description

Quartz Mini-Tube Infrared emitters

Shortwave infrared lamps utilize a low-quality tungsten filament to provide a high temperature source that responds quickly to voltage changes for precise control in your industrial infrared heating process. These quartz infrared lamps are sealed and filled with an inert halogen gas, which helps extend the life of the filament. Shortwave IR emitters feature a white ceramic or gold reflector coating on the back of the lamp to make it unidirectional. Glare-free, ruby red, Helen gold-coated, and satin-coated quartz lamps are available to filter out most high-intensity visible light.

The sealing area at both ends of the shortwave infrared lamp consists of a flat molybdenum ribbon welded to the tungsten filament and lamp holder leads or other terminations and clamped to be airtight. Several ceramic and metal bottom covers are available as below:

Features of the Infrared E-Mitter:

• Translucent Tubes
• Standard industry sizes and ratings up to 60 w/in2 (interchangeable with ceramic heaters).
• Highly reflective rugged aluminized steel housing construction.
• Rapid response - 2.5 to 7.5 deg F / sec. heat-up / cool-down rates, depending on unit watt density.
• Medium wavelength output (2.5 - 6 microns).
• Standard winding pattern gives uniform heating over entire face of heater. (Consult factory for custom or high intensity winding patterns and/or sizes.)
• Optional built-in type K or J T/C available in center of unit face.
• Ideal for systems requiring small area zoning and close control of process.
• Best when used at radiation distances of 4 - 10″ from work.
• Suitable for horizontal or vertical operation with tubes in horizontal plane.
• Designed for use in CRA linear structural housings and ARV array assemblies
• 120, 208, 240, 277 or 480V design (consult factory for 575V units)

Specifications for Shortwave IR Lamps

Specifications for Shortwave IR Emitters
Feature	Description
Lamp Temperature	2400°C (4350°F) ; Peak wavelength 1.15 microns
Diameter	T3 10mm (3/8") ; T4 12.5mm (1/2") or custom made
Maximum Heated Length	T3 1475mm (58") ; T4 1830mm (72")
Watt Density	100-200 Watts per inch
Voltage	120V - 600V
Controls	"Soft start" SCR with Pyrometer, IR Thermometer (IRT), or Manual.
Mounting	Horizontal or Vertical
Zoning	Multiple emitters can be easily wired in multiple zones
Heat Up/Cool Down	1 second
Orientation	Face Up, Face Down or Vertical
Colored Quartz	Optional Ruby Red (Non-glare) or Satin
Reflective Coating	Gold (Makes heaters unidirectional and wavelength pure) or Ceramic (more rugged than Gold and nearly as efficient)